How To Register Vtech Cordless Phone Cs6949

What are the differences betwixt the Build-in answering organization in my telephone and the Voicemail service from the phone service provider? How to choose between them?

• Tip 1 of ane

  For bulletin recording, your telephone has a Built-in answering system, and information technology also supports Voicemail service offered by your phone service provider(subscription is required, and fee may employ).

  The main differences between them are:

  	Built-IN ANSWERING Organization	VOICEMAIL SERVICE
  SUPPORTED Past	Telephone system	Telephone service provider
  SUBSCRIPTION	No	Yes
  FEES	No	May utilise
  ANSWER INCOMING CALLS	•After 3 rings past default. •It tin can be inverse via handset or the telephone base of operations bill of fare.	•Usually afterwards two rings. •Information technology can be changed by contacting your telephone service provider
  STORAGE	Telephone base of operations	Server or Organization
  DISPLAY NEW MESSAGE	• Handset - Xx new letters • Telephone base - Twenty new letters	• Handset - and New voicemail • Telephone base -
  RETRIEVE Letters	• Press PLAY/Cease on the telephone base; OR • Press MENU, and then select Play messages on the handset; OR •Access remotely with an access code	• Press on the dialpad, and enter an admission number from your telephone service provider.

  Based on the above information, if yous desire to...

  Use the built-in answering system to tape your letters
  Your Voicemail service tin can bundle in your telephone plan. As such, you would demand to contact your telephone service provider to disable it.
  *TIP: Can I switch back to Voicemail service if I desire to?
  Equally long as your telephone programme includes the Voicemail service, yous tin still re-enable information technology through your service provider.

  Use the voicemail service to record your messages
  Simply turn off the Built-in answering system at any time, and yous can use the Voicemail service only.

  Utilize both the Born answering organisation and the Voicemail service to record messages
  Past default, the Voicemail service is normally ready to respond subsequently 2 rings, while your Built-in answering arrangement is prepare after 3 rings. Please check with your telephone service provider to learn how to gear up your voicemail settings.

  Suggest to set your Born answering system to reply calls at least two rings before than your Voicemail service. In other words, if your answering system sets to answer after 3 rings (by default), so you need to set the Voicemail service to answer after 5 rings.

  What happened is that if you on a call or the answering system is already recording, and you receive ANOTHER incoming telephone call, then the third caller is able to leave a Voicemail bulletin.
  On the other hand, if you are not on a call nor the answering organization is recording, the incoming caller can get out a bulletin directly to the Built-in Answering system.

Why won't the handset CHARGE light plow on when I identify it in the base or charger?

• Tip 1 of 6

  Confirm proper installation of the telephone base and charger ability adapters, and handset battery. You lot should only use the VTech power adapters provided with your telephone. Make certain the ability adapters are connected to working electrical outlets that are not controlled by a wall switch.

• Tip 2 of half-dozen

  When placing the handset in the base or charger, confirm that the charge contacts are making a good connection. The charging battery icon is displayed and, on selected models, the CHARGE light illuminates on the handset while it charges.

  You should allow 16 hours to fully charge the handset battery. For optimum daily performance, return the handset to its phone base of operations or charger when not in use.

• Tip 3 of half-dozen

  Please brand certain that the cords (power and phone line) are plugged into the channels on the bottom of the base. If the cords are not properly installed, the base of operations volition not sit level and the telephone may non charge properly.

• Tip iv of vi

  Dirty charge contacts on the phone base and handset could foreclose the batteries from charging. Make clean the handset and base charge contacts using a pencil eraser or a fabric to eliminate eolith aggregating.

• Tip 5 of 6

  Make sure that the battery cover is properly secured on the handset. If the battery cover is not correctly installed, it may prevent the handset from charging.

• Tip half-dozen of vi

  Complete the following steps to reset the telephone system:
  Pace 1: Disconnect the power to the phone base.

  Step ii: Disconnect the handset batteries.

  Step 3: Look a few minutes and then reconnect the power to the phone base.

  Step iv: Reconnect the handset batteries.

  Step v: Wait most one minute for the handsets to re-establish a link with the phone base and then examination the telephone once again.

  NOTE: After resetting the telephone system, you will need to reset the clock. [On models with answering systems]: If the time is not set, you volition hear Fourth dimension and 24-hour interval Not Set when you lot heed to messages. Note: If you have caller ID service, the time will automatically exist updated whenever caller ID data is delivered. Still, since caller ID delivers the date, rather than the day, y'all must plan the year once so the system tin derive the solar day of the week.

  To fix the day and time, complete the post-obit steps:

  Footstep 1: Using the handset, when the phone is non in use, printing MENU/SELECT.

  Footstep ii: Printing ▲DIR or ▼CID until you see Prepare appointment/time. Side by side, press Card/SELECT.

  Step 3: Press ▲DIR or ▼CID to select the month, and so printing Bill of fare/SELECT; or utilise the dial pad to enter the month.

  Stride 4: Press ▲DIR or ▼CID to select the appointment, then printing Carte/SELECT; or use the dial pad to enter the engagement.

  Stride five: Printing ▲DIR or ▼CID to select the year, or use the punch pad to enter the year; then press MENU/SELECT.

  Stride six: Press ▲DIR or ▼CID to select the hour, then press MENU/SELECT; or use the dial pad to enter the hour.

  Stride 7: Press ▲DIR or ▼CID to select the infinitesimal, then press MENU/SELECT; or use the dial pad to enter the minute.

  Step eight: Press ▲DIR or ▼CID to select AM or PM.

  Stride 9: Press Bill of fare/SELECT. You lot volition hear a confirmation beep.

  Footstep 10: Press and hold OFF to return to the idle screen.

Why don't I get a punch tone on my handset?

• Tip 1 of ten

  Confirm proper installation of the telephone base and charger power adapters, and handset battery. You should only employ the VTech power adapters provided with your telephone. Make sure the ability adapters are continued to working electrical outlets that are not controlled by a wall switch.

• Tip 2 of x

  Ensure the phone string is securely installed at the base and the wall jack. Or attempt another phone string.

• Tip three of 10

  Move the handset closer to the base. The operating range may vary with environmental conditions and fourth dimension of utilize. At that place may be places within your environs that a cordless phone volition non work well. If the problem only occurs in certain areas of your environment, you tin conclude that there is nil wrong with the telephone. Consider trying a phone that operates on a unlike wireless frequency.

• Tip 4 of 10

  When placing the handset in the base or charger, confirm that the charge contacts are making a good connection. The charging bombardment icon is displayed and, on selected models, the CHARGE light illuminates on the handset while information technology charges.

  Y'all should permit xvi hours to fully accuse the handset battery. For optimum daily performance, return the handset to its telephone base or charger when not in use.

• Tip 5 of 10

  Make certain your handset is registered to the base of operations unit. Refer to the Adding and registering handsets process in the User's Manual.

• Tip 6 of x

  If you lot have continued this telephone to a phone jack that has not been used before, or that has not been used in quondam, at that place may be problems with this jack that yous are not aware of. Use a telephone jack that you know is in proper working gild.

• Tip 7 of 10

  If the other phones in your habitation are having the consequence, the problem could exist related to the telephone wiring in your home, or with your local phone service. Please call your service provider for further assistance.

• Tip eight of 10

  Recradle the handset for xv seconds, then elevator the handset and press TALK.

• Tip 9 of 10

  Consummate the following steps to reset the telephone organization:
  Step 1: Disconnect the power to the telephone base of operations.

  Footstep 2: Disconnect the handset batteries.

  Pace three: Expect a few minutes and and so reconnect the power to the telephone base.

  Step 4: Reconnect the handset batteries.

  Step 5: Wait virtually i infinitesimal for the handsets to re-institute a link with the telephone base and then exam the phone once more.

  NOTE: After resetting the telephone system, you will need to reset the clock. [On models with answering systems]: If the time is not set, you will hear Time and Day Not Prepare when you heed to messages. Annotation: If yous have caller ID service, the fourth dimension will automatically exist updated whenever caller ID information is delivered. However, since caller ID delivers the date, rather than the 24-hour interval, yous must program the yr once then the system can derive the day of the week.

  To set the twenty-four hours and time, consummate the following steps:

  Step 1: Using the handset, when the phone is not in use, printing Bill of fare/SELECT.

  Stride 2: Press ▲DIR or ▼CID until you see Set engagement/fourth dimension. Adjacent, press MENU/SELECT.

  Step 3: Press ▲DIR or ▼CID to select the month, then press MENU/SELECT; or use the punch pad to enter the calendar month.

  Step 4: Press ▲DIR or ▼CID to select the date, then press Carte/SELECT; or use the dial pad to enter the date.

  Step v: Press ▲DIR or ▼CID to select the year, or employ the dial pad to enter the year; and then press Card/SELECT.

  Footstep half dozen: Press ▲DIR or ▼CID to select the 60 minutes, and so press MENU/SELECT; or use the punch pad to enter the hour.

  Step 7: Printing ▲DIR or ▼CID to select the minute, then press Card/SELECT; or use the punch pad to enter the minute.

  Pace 8: Printing ▲DIR or ▼CID to select AM or PM.

  Footstep 9: Press Bill of fare/SELECT. You will hear a confirmation beep.

  Step 10: Press and hold OFF to return to the idle screen.

• Tip x of 10

  Y'all may need to replace the rechargeable battery, especially if information technology has been in service for more than than one year. To find a replacement, refer to our VTech Battery Finder. If a bombardment for your model is unavailable, you can search the internet using the primal words cordless phone batteries for an on-line supplier. If you adopt to buy locally, you can look for a replacement battery at your surface area consumer electronics retailers. Information technology is recommended that you lot take your present battery with you to insure your replacement is the correct size and has the correct plug (where applicative) and specifications.

Why doesn't my telephone ring when I receive calls?

• Tip 1 of 7

  If the phone does not ring at all, you may have the ringer turned off. The handset and base have independent ringer programming.

  To adjust the handset ringer volume:
  Stride 1: Printing MENU/SELECT on the handset when it is not in use.

  Step ii: Press ▲DIR or ▼CID to display Ringers, and so press Card/SELECT.

  Stride iii: Ringer volume is highlighted. Printing MENU/SELECT.

  Pace iv: Printing ▲DIR or ▼CID to arrange the ringer volume. A sample of each ringer volume plays as you curlicue through the choices. At the lowest setting, the ringer is silent and Ringer off is displayed on the handset.

  Stride 5: Printing Bill of fare/SELECT to ostend your option.

  Pace 6: Printing and hold OFF to return to the idle screen.

  To arrange the base ringer volume, press VOL ▲ or ▼ on the base when it is idle.

• Tip 2 of 7

  Movement the handset closer to the base. The operating range may vary with environmental weather condition and time of use. There may be places within your environment that a cordless telephone volition not work well. If the problem only occurs in certain areas of your environment, y'all can conclude that at that place is nix wrong with the phone. Consider trying a phone that operates on a different wireless frequency.

• Tip three of seven

  Other electronic products (i.e., 802.11 wireless networking products, radios, radio towers, pager towers, cell phones, intercoms, room monitors, televisions, personal computers, kitchen appliances and other cordless phones) tin can cause interference with your cordless phone. Effort installing your telephone as far abroad as possible from these types of electronic devices.

• Tip four of 7

  When placing the handset in the base or charger, ostend that the accuse contacts are making a skilful connexion. The charging battery icon is displayed and, on selected models, the CHARGE light illuminates on the handset while it charges.

  You should allow 16 hours to fully charge the handset battery. For optimum daily performance, return the handset to its phone base or charger when non in use.

• Tip 5 of 7

  If you have an excessive number of devices sharing the same phone line, it may impact the power of your telephone(due south) to band. Disconnect all other telephones from the line to see if this phone will now band. If it does, reconnect one telephone at a time until the ringing problem returns. You lot accept at present determined the maximum number of phones that can share the line.

• Tip half-dozen of 7

  If you have continued this telephone to a phone jack that has not been used earlier, or that has not been used in sometime, there may be issues with this jack that you lot are not aware of. Employ a telephone jack that you know is in proper working order.

• Tip 7 of seven

  You may have a line problem. To test for a line problem, test your unit of measurement at another location such as your neighbor's or relative'south house. If your unit works at another location, contact your local telephone visitor.

My telephone handset appears to be dead. What should I do?

• Tip 1 of 6

  If your handset responds in any way (beeps, displays a message on the screen, etc.) then it is non dead. Please review the Oftentimes Asked Questions listing to check for a more specific symptom to your problem.

  A common cause for dead handset symptoms is a dead battery. Nosotros recommend that you initially charge the handset bombardment for 16 hours. If the handset does non hold a charge or seems dead, we suggest the post-obit:

  • Please verify that the handset bombardment(s) is securely plugged into the dorsum of the handset.

  • Bank check that there is power to the base and charger. If at that place is power and the handset is cradled face up, the CHARGE light on the handset will exist on, and/or the battery icon will be displayed.

• Tip ii of 6

  Make sure you lot are using the bombardment supplied with your phone. If yous are replacing the battery and you need assistance, refer to our VTech Battery Finder. If a bombardment for your model is unavailable, y'all tin can search the internet using the key words cordless telephone batteries for an on-line supplier. If you lot adopt to buy locally, yous tin can look for a replacement battery at your expanse consumer electronics retailers. Information technology is recommended that you take your nowadays battery with you lot to insure your replacement is the correct size and has the right plug (where applicable) and specifications.

• Tip 3 of vi

  When placing the handset in the base or charger, ostend that the accuse contacts are making a good connection. The charging battery icon is displayed and, on selected models, the CHARGE light illuminates on the handset while it charges.

  You should allow 16 hours to fully charge the handset battery. For optimum daily functioning, render the handset to its phone base or charger when non in use.

• Tip 4 of vi

  Recradle the handset for xv seconds, then lift the handset and printing TALK.

• Tip v of half dozen

  Consummate the following steps to reset the telephone system:
  Footstep ane: Disconnect the ability to the phone base of operations.

  Step 2: Disconnect the handset batteries.

  Step three: Wait a few minutes and then reconnect the ability to the telephone base.

  Footstep iv: Reconnect the handset batteries.

  Step five: Wait about 1 minute for the handsets to re-constitute a link with the telephone base then test the phone again.

  Note: After resetting the phone arrangement, y'all volition need to reset the clock. [On models with answering systems]: If the fourth dimension is not set, you lot will hear Fourth dimension and Twenty-four hours Non Gear up when you listen to messages. NOTE: If yous have caller ID service, the fourth dimension will automatically exist updated whenever caller ID information is delivered. Nonetheless, since caller ID delivers the appointment, rather than the day, you lot must program the twelvemonth once so the system can derive the twenty-four hour period of the week.

  To prepare the twenty-four hours and time, complete the following steps:

  Pace ane: Using the handset, when the phone is not in use, press MENU/SELECT.

  Footstep ii: Printing ▲DIR or ▼CID until yous see Set date/time. Next, press Card/SELECT.

  Pace 3: Press ▲DIR or ▼CID to select the month, and then press MENU/SELECT; or utilize the punch pad to enter the month.

  Step 4: Press ▲DIR or ▼CID to select the date, then printing MENU/SELECT; or use the dial pad to enter the engagement.

  Stride five: Press ▲DIR or ▼CID to select the year, or use the punch pad to enter the twelvemonth; then press MENU/SELECT.

  Step vi: Press ▲DIR or ▼CID to select the hour, then press MENU/SELECT; or use the dial pad to enter the hour.

  Step 7: Press ▲DIR or ▼CID to select the minute, then press MENU/SELECT; or use the dial pad to enter the minute.

  Stride 8: Press ▲DIR or ▼CID to select AM or PM.

  Stride 9: Press MENU/SELECT. Yous will hear a confirmation beep.

  Step 10: Printing and concur OFF to return to the idle screen.

• Tip six of 6

  You may need to replace the rechargeable bombardment, specially if information technology has been in service for more than than one yr. To find a replacement, refer to our VTech Battery Finder. If a battery for your model is unavailable, you can search the internet using the cardinal words cordless phone batteries for an on-line supplier. If y'all prefer to buy locally, yous can await for a replacement battery at your surface area consumer electronics retailers. It is recommended that yous take your nowadays battery with you to insure your replacement is the correct size and has the right plug (where applicable) and specifications.

At that place is a lot of static and other dissonance on the line when I use this phone. What tin be washed to improve the phone call quality?

• Tip 1 of 9

  If y'all subscribe to DSL service for this phone line, DSL filters must be plugged into EVERY phone jack that has a phone. The DSL signal can cause static/noise, squealing (similar to fax tones), caller ID disruption and other issues on your line. DSL filters block the high frequency DSL signals from being transmitted to the telephone. If you lot are not using the DSL filters provided by the telephone company, this will cause static/noise and possibly caller id problems on your phones.

  In most cases, nosotros recommend y'all connect the plug end of the DSL filter into the telephone jack, and then connect a telephone cord between the filter and your phone.

  Please contact your service provider to obtain DSL filters and installation information.

• Tip two of 9

  Move the handset closer to the base of operations. The operating range may vary with environmental conditions and fourth dimension of use. There may be places inside your environment that a cordless phone will not piece of work well. If the problem only occurs in certain areas of your environs, you lot can conclude that there is nothing incorrect with the phone. Consider trying a phone that operates on a unlike wireless frequency.

• Tip 3 of 9

  To become improve reception, try moving the telephone base of operations to higher location. Relocate telephone base of operations nearly a window if using telephone outside.

• Tip iv of 9

  Other electronic products (i.east., 802.11 wireless networking products, radios, radio towers, pager towers, cell phones, intercoms, room monitors, televisions, personal computers, kitchen appliances and other cordless phones) can cause interference with your cordless telephone. Try installing your phone as far abroad as possible from these types of electronic devices.

• Tip v of 9

  Disconnect all other equipment on the telephone line, equally the trouble may exist acquired by a different production than your cordless telephone system. Reconnect your equipment, i unit of measurement at a fourth dimension, until you determine the cause of the problem.

• Tip half dozen of 9

  If y'all have continued this telephone to a telephone jack that has non been used before, or that has not been used in one-time, there may exist bug with this jack that you lot are non enlightened of. Use a telephone jack that you know is in proper working gild.

• Tip vii of 9

  If your phone shares a power outlet with a modem, or if it is plugged in to a shared surge protector, endeavour plugging the phone (or modem/surge protector) in at a dissimilar location. If this solves the trouble, re-locate your telephone or modem farther autonomously from one some other, or employ separate surge protectors.

• Tip eight of 9

  Yous may accept a line trouble. To test for a line trouble, test your unit of measurement at another location such as your neighbor'south or relative'due south house. If your unit works at another location, contact your local telephone visitor.

• Tip 9 of 9

  There may be places inside your surround that a cordless phone will not piece of work well. If the trouble only occurs in sure areas of your environment, in that location is nada wrong with the telephone. This is normal radio operation.

Why do calls fade/cut in and out when I'm using this phone?

• Tip 1 of 9

  If you subscribe to DSL service for this phone line, DSL filters must be plugged into EVERY phone jack that has a telephone. The DSL signal can cause static/noise, squealing (similar to fax tones), caller ID disruption and other issues on your line. DSL filters cake the high frequency DSL signals from being transmitted to the phone. If y'all are not using the DSL filters provided by the telephone company, this volition cause static/racket and perchance caller id problems on your phones.

  In most cases, we recommend you connect the plug terminate of the DSL filter into the phone jack, then connect a phone cord between the filter and your phone.

  Please contact your service provider to obtain DSL filters and installation data.

• Tip ii of 9

  Movement the handset closer to the base. The operating range may vary with environmental conditions and time of use. There may be places within your environment that a cordless phone will not work well. If the problem only occurs in certain areas of your environment, yous tin can conclude that at that place is nothing wrong with the telephone. Consider trying a phone that operates on a different wireless frequency.

• Tip 3 of nine

  Other electronic products (i.east., 802.eleven wireless networking products, radios, radio towers, pager towers, prison cell phones, intercoms, room monitors, televisions, personal computers, kitchen appliances and other cordless phones) tin can cause interference with your cordless telephone. Endeavour installing your telephone as far abroad equally possible from these types of electronic devices.

• Tip 4 of ix

  To go better reception, endeavor moving the telephone base to higher location. Relocate telephone base most a window if using phone outside.

• Tip 5 of 9

  Excessive background noise will crusade a speakerphone to fade in and out. Try controlling the background racket by turning off any audio devices near the speakerphone. Likewise, try to avoid interrupting the person at the other end of the chat while they are speaking. If background dissonance cannot be controlled, you should terminate speakerphone operation and return to normal handset style.

• Tip 6 of 9

  When using a speakerphone, controlling background dissonance in your environment is essential. While yous are listening to your party, press MUTE (or MUTE/DELETE) to temporarily turn the microphone off. When information technology is your turn to speak, remember to press MUTE again to turn the microphone on.

• Tip 7 of 9

  If you have connected this telephone to a telephone jack that has non been used earlier, or that has not been used in one-time, there may be problems with this jack that you are not aware of. Use a telephone jack that you know is in proper working lodge.

• Tip 8 of ix

  In that location may be places within your environment that a cordless phone will not work well. If the problem only occurs in sure areas of your environment, there is nada wrong with the phone. This is normal radio functioning.

• Tip 9 of 9

  You may have a line trouble. To exam for a line problem, examination your unit at another location such as your neighbor's or relative's firm. If your unit works at some other location, contact your local telephone visitor.

Out of range OR No power at base is shown in the handset display window. Why don't I get a dial tone when I try to use this phone?

• Tip 1 of half-dozen

  Confirm proper installation of the telephone base and charger power adapters, and handset battery. Yous should but apply the VTech power adapters provided with your phone. Make certain the ability adapters are connected to working electric outlets that are not controlled by a wall switch.

• Tip ii of half-dozen

  Move the handset closer to the base of operations. The operating range may vary with environmental conditions and time of use. In that location may be places within your environment that a cordless phone will not work well. If the problem only occurs in certain areas of your surround, you can conclude that in that location is nothing incorrect with the phone. Consider trying a phone that operates on a different wireless frequency.

• Tip 3 of six

  Other electronic products (i.due east., 802.eleven wireless networking products, radios, radio towers, pager towers, cell phones, intercoms, room monitors, televisions, personal computers, kitchen appliances and other cordless phones) can cause interference with your cordless phone. Endeavour installing your phone as far away as possible from these types of electronic devices.

• Tip 4 of vi

  To get better reception, try moving the telephone base to higher location. Relocate telephone base near a window if using telephone outside.

• Tip 5 of half-dozen

  Recradle the handset for fifteen seconds, then lift the handset and press TALK.

• Tip 6 of 6

  Complete the following steps to reset the telephone system:
  Step 1: Disconnect the ability to the telephone base.

  Step two: Disconnect the handset batteries.

  Step three: Wait a few minutes then reconnect the power to the telephone base of operations.

  Stride 4: Reconnect the handset batteries.

  Pace five: Wait about one minute for the handsets to re-found a link with the telephone base and and so test the phone over again.

  NOTE: After resetting the telephone system, you volition need to reset the clock. [On models with answering systems]: If the time is non ready, y'all will hear Time and Day Not Set when yous listen to messages. Notation: If yous have caller ID service, the fourth dimension will automatically exist updated whenever caller ID information is delivered. Notwithstanding, since caller ID delivers the date, rather than the day, you must program the year one time so the system can derive the mean solar day of the week.

  To set the day and time, complete the following steps:

  Stride 1: Using the handset, when the phone is not in use, press MENU/SELECT.

  Step ii: Press ▲DIR or ▼CID until you see Set date/time. Next, press Bill of fare/SELECT.

  Footstep 3: Printing ▲DIR or ▼CID to select the month, then printing MENU/SELECT; or apply the dial pad to enter the calendar month.

  Stride iv: Press ▲DIR or ▼CID to select the date, then press Menu/SELECT; or use the dial pad to enter the engagement.

  Step 5: Press ▲DIR or ▼CID to select the year, or use the punch pad to enter the year; and so press Carte/SELECT.

  Footstep six: Printing ▲DIR or ▼CID to select the hour, then printing Carte/SELECT; or utilize the dial pad to enter the hour.

  Stride 7: Press ▲DIR or ▼CID to select the minute, then printing Carte du jour/SELECT; or use the dial pad to enter the minute.

  Step 8: Printing ▲DIR or ▼CID to select AM or PM.

  Step 9: Press MENU/SELECT. Y'all will hear a confirmation beep.

  Pace 10: Printing and hold OFF to return to the idle screen.

How do I register a new accessory handset to the base of operations?

• Tip 1 of 1

  Charge the new handset before attempting registration.

  The unregistered handset will display: To register HS...see manual. If you do not see this message, lift the handset from its charger for a few seconds, then place it back in the charger.

  Now, identify the handset in the Base of operations. The handset volition starting time display Registering, followed past Registered. The newly registered handset will be assigned the everyman extension number not previously assigned to another system handset. If registration is not successful, remove the handset from the base, then repeat the higher up process.

Why am I unable to dial out using this telephone?

• Tip 1 of 9

  Ostend proper installation of the telephone base and charger ability adapters, and handset battery. You should just utilise the VTech ability adapters provided with your telephone. Brand sure the ability adapters are connected to working electric outlets that are non controlled by a wall switch.

• Tip 2 of 9

  You may be dialing before the handset has fully established a link with the base of operations. Make certain you verify presence of dial tone before dialing. Information technology may help to wait a few seconds after handset is turned on before you brainstorm dialing.

• Tip 3 of nine

  Movement the handset closer to the base. The operating range may vary with environmental atmospheric condition and time of use. At that place may be places within your environment that a cordless telephone will not piece of work well. If the trouble only occurs in sure areas of your environment, y'all tin can conclude that there is nothing wrong with the telephone. Consider trying a phone that operates on a different wireless frequency.

• Tip 4 of 9

  When using a speakerphone, controlling background noise in your environment is essential. While you lot are listening to your party, press MUTE (or MUTE/DELETE) to temporarily turn the microphone off. When it is your turn to speak, remember to press MUTE again to plow the microphone on.

• Tip 5 of 9

  Static, noise, calls cutting in and out and other erratic performance may be caused by nearby electronic equipment and other cordless devices using the same frequency. In add-on, police scanners and HAM radios can generate interference. Dissever your telephone system from these devices as much as possible.

• Tip 6 of 9

  Recradle the handset for 15 seconds, and then lift the handset and press TALK.

• Tip 7 of 9

  If y'all have connected this phone to a telephone jack that has non been used before, or that has not been used in one-time, there may exist problems with this jack that y'all are not aware of. Employ a phone jack that you lot know is in proper working order.

• Tip eight of 9

  Complete the following steps to reset the phone system:
  Step 1: Disconnect the power to the phone base.

  Step 2: Disconnect the handset batteries.

  Step 3: Look a few minutes and and so reconnect the power to the phone base.

  Step 4: Reconnect the handset batteries.

  Step five: Await almost i minute for the handsets to re-establish a link with the telephone base and then exam the phone over again.

  Note: Afterwards resetting the telephone system, you volition need to reset the clock. [On models with answering systems]: If the time is not set, you will hear Fourth dimension and Day Not Fix when you mind to messages. NOTE: If you have caller ID service, the time will automatically exist updated whenever caller ID information is delivered. All the same, since caller ID delivers the date, rather than the solar day, you lot must plan the twelvemonth in one case then the organization can derive the 24-hour interval of the week.

  To gear up the mean solar day and time, complete the following steps:

  Step ane: Using the handset, when the phone is not in use, press Carte du jour/SELECT.

  Footstep ii: Press ▲DIR or ▼CID until you run across Set up date/time. Next, press Card/SELECT.

  Stride 3: Press ▲DIR or ▼CID to select the calendar month, and then press Bill of fare/SELECT; or use the dial pad to enter the calendar month.

  Footstep iv: Press ▲DIR or ▼CID to select the engagement, then press Bill of fare/SELECT; or use the dial pad to enter the date.

  Step 5: Printing ▲DIR or ▼CID to select the year, or use the dial pad to enter the twelvemonth; so printing MENU/SELECT.

  Stride 6: Press ▲DIR or ▼CID to select the hr, then press Carte du jour/SELECT; or use the punch pad to enter the hour.

  Step vii: Press ▲DIR or ▼CID to select the minute, and then press MENU/SELECT; or use the dial pad to enter the minute.

  Stride 8: Press ▲DIR or ▼CID to select AM or PM.

  Footstep nine: Press MENU/SELECT. Y'all volition hear a confirmation beep.

  Step x: Press and hold OFF to return to the idle screen.

• Tip 9 of nine

  You may accept a line problem. To test for a line problem, examination your unit at another location such as your neighbour's or relative'due south house. If your unit works at another location, contact your local phone company.

My speakerphone fades in and out. What tin I exercise to set up this?

• Tip 1 of 3

  Excessive background noise volition crusade a speakerphone to fade in and out. Try decision-making the groundwork racket by turning off any audio devices well-nigh the speakerphone. Also, try to avoid interrupting the person at the other end of the conversation while they are speaking. If background noise cannot be controlled, you lot should terminate speakerphone performance and return to normal handset fashion.

• Tip 2 of three

  When using a speakerphone, you should be reasonably close to the base (or handset) in social club to hear and exist heard. The optimum altitude volition depend on room acoustics and dissonance levels. It is always a good idea to command ambient dissonance in your environment when using a speakerphone.

• Tip 3 of three

  When using a speakerphone, decision-making background noise in your environment is essential. While you are listening to your party, press MUTE (or MUTE/DELETE) to temporarily turn the microphone off. When it is your turn to speak, remember to press MUTE again to plough the microphone on.

How practise I set the day and time on my telephone ?

• Tip ane of 1

  To set the date and time, complete the following steps:

  Stride 1: Using the handset, when the phone is non in utilize, printing Card/SELECT.

  Step ii: Press ▲DIR or ▼CID until you see Set engagement/fourth dimension. Next, printing MENU/SELECT.

  Pace 3: Press ▲DIR or ▼CID to select the month, then press MENU/SELECT; or employ the dial pad to enter the month.

  Stride 4: Press ▲DIR or ▼CID to select the appointment, so printing MENU/SELECT; or use the dial pad to enter the date.

  Step v: Press ▲DIR or ▼CID to select the year, or use the dial pad to enter the year; and then printing Menu/SELECT.

  Pace vi: Press ▲DIR or ▼CID to select the hour, then printing Menu/SELECT; or use the dial pad to enter the hour.

  Pace seven: Press ▲DIR or ▼CID to select the minute, so press MENU/SELECT; or use the dial pad to enter the infinitesimal.

  Step 8: Press ▲DIR or ▼CID to select AM or PM.

  Stride 9: Printing MENU/SELECT. You volition hear a confirmation beep.

  Step 10: Press and hold OFF to render to the idle screen.

Why won't my Answering System record any messages?

• Tip 1 of 6

  Make certain your answering organisation is On. At the base, press ANS ON/OFF until you hear Calls will be answered and the button illuminates; OR,

  Stride 1: Using a system handset when it is non in utilise, press MENU/SELECT. Printing ▼CID until you lot come across >Answering Sys.

  Step two: Press Carte du jour/SELECT again. Press ▲VOL+ or ▼CID until you see >Reply ON/OFF.

  Pace 3: Printing Menu/SELECT, then press ▲VOL+ or ▼CID until you see >ON.

  Pace 4: Press MENU/SELECT. You volition hear a confirmation tone.

  Stride five: Printing and agree OFF to return to the idle screen.

• Tip 2 of 6

  The book for your Telephone Answering System may be turned downward also low to hear any recorded messages. Printing the VOL ▲ push to turn up the volume.

• Tip 3 of 6

  Your answering system is full. Old letters must be deleted in society for the system to accept new messages.

  To delete a single bulletin: While the message is playing at the Base, press DELETE.

  To delete all messages: While the phone is idle, at the Base of operations, press DELETE twice.

  You can also delete messages using a organisation handset. While listening to a message on the handset, press three. To delete all old letters, when the handset is not in utilize, press MENU/SELECT to access the ANS. Arrangement menu, then select the DEL ALL Former selection.

• Tip iv of 6

  If you have voicemail service in addition to your answering system, your callers' messages may be going into voicemail earlier your answering system picks up the call. Plan your voicemail to pick up at least two rings greater than the number of rings your answering organization is ready to answer the telephone call.

• Tip 5 of 6

  The answering system will terminate recording a message if the caller's vox is barely audible. It volition also terminate recording if a message exceeds the maximum time permitted. For more than data, consult your User'southward Manual.

• Tip 6 of 6

  You may need to reset the Telephone Answering System. Complete the following steps to reset the Telephone Answering Arrangement:
  Step 1: Disconnect the power to the telephone base.

  Step two: Wait a few minutes and then reconnect the power to the telephone base.

  Step 3: Gear up the day and time.

Why tin can't I play my messages?

• Tip 1 of 5

  Make sure that the power cord is securely plugged into the base and electrical outlet. Brand sure the electrical outlet is not controlled by a wall switch.

• Tip two of 5

  The volume for your Telephone Answering System may be turned down too low to hear any recorded messages. Press the VOL ▲ push to plough up the book.

• Tip 3 of 5

  Press ►PLAY/■Stop to play messages at the Base. New messages, if any, volition be played first.

  Printing ►PLAY/■STOP to cease message playback.

  Y'all can too play messages on a system handset. When the handset is non in use, press Carte du jour/SELECT twice to play your messages.

• Tip 4 of 5

  If you accept voicemail service in addition to your answering system, your callers' messages may be going into voicemail earlier your answering system picks upward the call. Program your voicemail to choice up at least ii rings greater than the number of rings your answering system is set to reply the call.

• Tip five of 5

  Complete the following steps to reset the telephone system:
  Footstep ane: Disconnect the power to the phone base of operations.

  Step 2: Disconnect the handset batteries.

  Step three: Expect a few minutes and and so reconnect the power to the telephone base.

  Step iv: Reconnect the handset batteries.

  Step 5: Wait about one infinitesimal for the handsets to re-plant a link with the telephone base and then test the phone again.

  Notation: Afterward resetting the telephone system, you lot volition demand to reset the clock. [On models with answering systems]: If the fourth dimension is not set, you volition hear Time and 24-hour interval Not Set when yous listen to messages. Notation: If y'all take caller ID service, the time will automatically be updated whenever caller ID information is delivered. However, since caller ID delivers the date, rather than the mean solar day, you must plan the year one time so the system can derive the day of the week.

  To set the day and time, complete the following steps:

  Step 1: Using the handset, when the telephone is not in utilise, press Carte/SELECT.

  Step 2: Printing ▲DIR or ▼CID until yous run into Set date/time. Next, press MENU/SELECT.

  Step three: Press ▲DIR or ▼CID to select the month, and so press MENU/SELECT; or use the punch pad to enter the month.

  Step four: Printing ▲DIR or ▼CID to select the date, then press MENU/SELECT; or use the punch pad to enter the date.

  Stride 5: Press ▲DIR or ▼CID to select the yr, or utilise the punch pad to enter the year; and then press Carte du jour/SELECT.

  Step 6: Printing ▲DIR or ▼CID to select the hour, then press MENU/SELECT; or utilise the dial pad to enter the hour.

  Stride 7: Press ▲DIR or ▼CID to select the minute, then press Bill of fare/SELECT; or use the punch pad to enter the minute.

  Step eight: Press ▲DIR or ▼CID to select AM or PM.

  Stride 9: Printing Bill of fare/SELECT. You volition hear a confirmation beep.

  Step 10: Press and agree OFF to render to the idle screen.

How do I record an announcement on my answering system ?

• Tip 1 of 1

  To record your announcement (greeting):

  Step i: Using a organization handset when information technology is not in use, press MENU/SELECT.

  Stride 2: Press ▼CID until you see >Answering Sys.

  Step 3: Press Carte du jour/SELECT. Yous will see >Announcement.

  Step 4: Press MENU/SELECT, then press 7 to begin recording. Speak into the handset as if you were on a call.

  Step 5: Press five to stop recording. Your announcement volition be played for you.

  Stride half dozen: Press and concord OFF to return to the idle screen.

Why am I non receiving caller ID on my phone?

• Tip one of 9

  Caller ID and Call Waiting ID are subscription services, available from most local telephone service providers. You must subscribe to these services in club for the features to work on your telephone. Contact your local telephone service provider for more data.

  In add-on, your caller must be calling from an area that supports caller ID.

  Both yous and your caller's phone service provider must use compatible caller ID systems.

  If you subscribe to DSL service for this telephone line, DSL filters must be plugged into EVERY phone jack that has a phone. The DSL signal tin can cause caller ID disruption, static, noise and other issues on your line. DSL filters cake the high frequency DSL signals from beingness transmitted to the telephone. If yous are not using the DSL filters provided by the telephone company, this will cause static/noise and possibly caller id issues on your phones.

  In most cases, we recommend you connect the plug terminate of the DSL filter into the telephone jack, then connect a telephone cord between the filter and your phone.

  Please contact your service provider to obtain DSL filters and installation information.

  Caller ID and Call Waiting ID may non be bachelor for every telephone call. Common reasons are incompatibilities betwixt your and your caller's service, manual errors and answering calls before the ID information is received.

• Tip 2 of 9

  Caller ID data may non be displayed on your phone if you answer a call at or before the second band. This would also utilize to an answering device that "answers" the call at or before the 2nd ring.

• Tip iii of nine

  If yous subscribe to DSL service for this telephone line, DSL filters must be plugged into EVERY telephone jack that has a phone. The DSL signal can cause static/noise, squealing (similar to fax tones), caller ID disruption and other bug on your line. DSL filters block the loftier frequency DSL signals from existence transmitted to the telephone. If you are not using the DSL filters provided by the telephone company, this will cause static/noise and possibly caller id bug on your phones.

  In most cases, we recommend you connect the plug end of the DSL filter into the phone jack, then connect a telephone cord betwixt the filter and your phone.

  Please contact your service provider to obtain DSL filters and installation information.

• Tip iv of 9

  Movement the handset closer to the base of operations. The operating range may vary with environmental conditions and time of utilize. At that place may be places within your surroundings that a cordless phone will not work well. If the problem but occurs in sure areas of your environment, yous can conclude that there is nothing wrong with the phone. Consider trying a phone that operates on a unlike wireless frequency.

• Tip v of nine

  Other electronic products (i.e., 802.xi wireless networking products, radios, radio towers, pager towers, cell phones, intercoms, room monitors, televisions, personal computers, kitchen appliances and other cordless phones) tin can cause interference with your cordless phone. Try installing your telephone as far away every bit possible from these types of electronic devices.

• Tip 6 of 9

  Disconnect all other equipment on the phone line, as the problem may be caused by a different product than your phone. Reconnect your equipment, i unit at a time, until you determine the cause of the problem.

• Tip 7 of 9

  Disconnect all other devices that have Caller ID capability. If the trouble stops, in that location is an incompatability with ane or more of your units.

• Tip 8 of nine

  Consummate the following steps to reset the telephone system:
  Pace one: Disconnect the power to the telephone base.

  Stride 2: Disconnect the handset batteries.

  Step three: Wait a few minutes and then reconnect the power to the telephone base.

  Pace 4: Reconnect the handset batteries.

  Step v: Expect about 1 minute for the handsets to re-establish a link with the telephone base and then test the phone over again.

  NOTE: Afterward resetting the telephone system, you volition demand to reset the clock. [On models with answering systems]: If the time is not set, y'all will hear Fourth dimension and Day Not Prepare when yous heed to messages. Note: If you have caller ID service, the time will automatically be updated whenever caller ID information is delivered. Even so, since caller ID delivers the date, rather than the 24-hour interval, y'all must plan the twelvemonth once and then the system tin derive the day of the calendar week.

  To set the day and time, complete the following steps:

  Footstep ane: Using the handset, when the phone is not in use, press MENU/SELECT.

  Step two: Press ▲DIR or ▼CID until y'all meet Ready engagement/time. Next, press MENU/SELECT.

  Footstep iii: Press ▲DIR or ▼CID to select the month, then press MENU/SELECT; or use the punch pad to enter the month.

  Step iv: Press ▲DIR or ▼CID to select the appointment, then press Menu/SELECT; or use the dial pad to enter the date.

  Footstep 5: Press ▲DIR or ▼CID to select the yr, or use the punch pad to enter the year; then press MENU/SELECT.

  Step 6: Press ▲DIR or ▼CID to select the hour, then press Card/SELECT; or use the punch pad to enter the hour.

  Footstep 7: Press ▲DIR or ▼CID to select the infinitesimal, then printing Carte/SELECT; or use the dial pad to enter the minute.

  Stride 8: Press ▲DIR or ▼CID to select AM or PM.

  Stride ix: Press Carte du jour/SELECT. Yous volition hear a confirmation beep.

  Footstep ten: Press and hold OFF to render to the idle screen.

• Tip 9 of 9

  Equally your local telephone company provides the caller ID information, contact them if the trouble persists.

My VOICEMAIL indicators remain on after I have reviewed my messages. How do I plough the indicators off?

• Tip ane of 1

  Once you accept listened to all new messages in your voice postal service box, the voice post indicators on your phone will turn off later on you stop your phone call. If the indicators remain on after you have reviewed all new messages, you tin manually plow off the indicators:
  Step 1: Press Menu/SELECT.

  Step two: Press ▲ or ▼ until Settings is selected.

  Step 3: Press MENU/SELECT. Next, printing ▲ or ▼ until Clr voicemail is selected.

  Step iv: Press MENU/SELECT. Turn off indicator? or Reset VM Icon? or Reset Voicemail Indicator? is displayed. Press MENU/SELECT to confirm.

  Step five: Press and hold OFF to return to idle style.

  Note: This process merely turns off the indicators. It does NOT delete any messages currently stored in your voice post box.

My handset displays either LOAD DELTA FILE or LOAD DEFAULT DELTA FILE. What should I do?

• Tip 1 of 2

  If the handset is not responding normally, you lot may demand to reset your telephone organisation. Consummate the following steps to reset the telephone organization:
  Step ane: Disconnect the power to the telephone base.

  Step 2: Disconnect the handset battery.

  Step iii: Wait a few minutes and then reconnect the power to the phone base.

  Step 4: Reconnect the handset bombardment

  Step 5: Wait about one infinitesimal for the handset to re-establish a link with the telephone base of operations so exam the phone over again.

• Tip 2 of 2

  If the telephone continues to operate abnormally, then you may need to supercede information technology. Delight contact our Consumer Sales and Service Center for further assistance, (800) 595-9511.

Why won't the battery(s) in my telephone handset hold a charge?

• Tip i of 6

  Ostend proper installation of the phone base and charger power adapters, and handset battery. You should only use the VTech power adapters provided with your telephone. Make sure the power adapters are connected to working electrical outlets that are not controlled past a wall switch.

• Tip 2 of vi

  When placing the handset in the base or charger, confirm that the accuse contacts are making a good connectedness. The charging battery icon is displayed and, on selected models, the CHARGE lite illuminates on the handset while it charges.

  You should let 16 hours to fully charge the handset battery. For optimum daily performance, return the handset to its telephone base of operations or charger when not in utilise.

• Tip 3 of vi

  If you are a frequent user of the handset speakerphone feature, the total talk time on a fullly charged battery will decrease.

• Tip 4 of vi

  Make sure you are using the bombardment supplied with your phone. If y'all are replacing the bombardment and you need help, refer to our VTech Battery Finder. If a battery for your model is unavailable, you can search the internet using the key words cordless telephone batteries for an on-line supplier. If you prefer to purchase locally, y'all can expect for a replacement battery at your area consumer electronics retailers. It is recommended that yous take your present battery with y'all to insure your replacement is the correct size and has the correct plug (where applicable) and specifications.

• Tip 5 of 6

  Complete the following steps to reset the telephone organization:
  Footstep i: Disconnect the ability to the telephone base.

  Pace 2: Disconnect the handset batteries.

  Pace three: Look a few minutes and and so reconnect the power to the phone base of operations.

  Footstep four: Reconnect the handset batteries.

  Step 5: Wait about one infinitesimal for the handsets to re-establish a link with the phone base of operations and then test the phone again.

  NOTE: Subsequently resetting the phone arrangement, you will need to reset the clock. [On models with answering systems]: If the fourth dimension is not set, you lot will hear Time and Mean solar day Non Gear up when you listen to messages. Note: If you have caller ID service, the fourth dimension will automatically exist updated whenever caller ID information is delivered. Withal, since caller ID delivers the appointment, rather than the day, you must program the year one time so the system can derive the day of the week.

  To set the day and time, complete the following steps:

  Step 1: Using the handset, when the phone is not in use, press MENU/SELECT.

  Step 2: Press ▲DIR or ▼CID until you lot see Prepare date/time. Side by side, press MENU/SELECT.

  Step iii: Press ▲DIR or ▼CID to select the month, and so printing MENU/SELECT; or use the dial pad to enter the month.

  Step 4: Press ▲DIR or ▼CID to select the date, and then press Card/SELECT; or use the punch pad to enter the date.

  Step 5: Printing ▲DIR or ▼CID to select the year, or employ the dial pad to enter the year; then press MENU/SELECT.

  Step half-dozen: Printing ▲DIR or ▼CID to select the hr, and so press MENU/SELECT; or utilise the dial pad to enter the hour.

  Stride 7: Printing ▲DIR or ▼CID to select the infinitesimal, then press Menu/SELECT; or apply the dial pad to enter the infinitesimal.

  Step eight: Printing ▲DIR or ▼CID to select AM or PM.

  Pace nine: Press MENU/SELECT. You volition hear a confirmation beep.

  Stride 10: Press and hold OFF to return to the idle screen.

• Tip vi of 6

  Y'all may need to replace the rechargeable bombardment, particularly if it has been in service for more than one year. To discover a replacement, refer to our VTech Bombardment Finder. If a battery for your model is unavailable, yous can search the internet using the key words cordless telephone batteries for an on-line supplier. If you adopt to purchase locally, you lot can look for a replacement battery at your surface area consumer electronics retailers. It is recommended that you take your present battery with y'all to insure your replacement is the right size and has the correct plug (where applicable) and specifications.

How to set the Abode Area Lawmaking setting for 10-digit local dialing?

• Tip 1 of 1

  Mandatory 10-digit local dialing (surface area code + phone number) has begun, and your telephone service provider requires you to dial ten digits to make a local call.

  For users with new telephones

  Do Non use the home area code feature.DO NOT enter your area code into the telephone equally the habitation expanse lawmaking. Keep the default settings _ _ _ (empty).

  For electric current users with existing telephones

  If you lot have set up the home area code previously, then you have to

   deleteyour home area code. Otherwise, y'all cannot place local calls from your caller ID log.

  Depending on your telephone model(s), the keys may vary; withal, the general operating steps are the same.

  Follow the steps to gear up the home area code of your model till it displays the 3-digit home area code.

  And then, press and hold DELETE to erase all digits.

  The home area code will restore to its default settings of _ _ _ (empty).

  Printing SELECT or Save to confirm.

Why Mandatory 10-digit local dialing?

• Tip 1 of i

  Why Mandatory 10-digit local dialing?

  The Federal Communications Committee (FCC) has adopted 988 equally a new three-digit number to exist used nationwide to reach the National Suicide Prevention and Mental Health Crisis Lifeline, starting July 16, 2022. The new rules will employ to all telecommunications carriers as well as all interconnected and one-manner Voice over Internet Protocol (VoIP) service providers.

  To make sure calls reach the hotline, some parts of the land that currently permit 7-digit dialing and also use 988 as a Central office lawmaking will take to transition to ten-digit dialing. A 10-digit number includes a iii-digit area code in front of a traditional 7-digit phone number.

  Timeline for Transition to 10-Digit Dialing - FCC .

  List of affected expanse codes .

I accidentally set my LCD language to Spanish or French, and I don't know how to change it back to English language.

• Tip 1 of 1

  While the handset is not in use, press Menu in one case then enter *364#.

I am using my VoIP box to set up my wireless home phone and other network devices. All devices work ordinarily except my phone, which has no dial tone/ displays Line in Utilize with decorated tone/ poor sound quality. What should I exercise?

• Tip ane of 1

  Despite your VoIP box shows total signal force, there could even so be no dial tone/ display Line in Use/ etc. This may due to the abnormality of betoken and voltage levels. Follow this short video to reset your VoIP box and its connected devices.

  (For non-IS8151 series - all other models) https://www.youtube.com/picket?5=mXbXl4froUc&t=25s

  (For IS8151-X serial) https://www.youtube.com/watch?v=rJ9PNkwBzfE&t=3s

  [Background]
  • VoIP box connected via SIM/ LAN connectedness.
  • Some VoIP boxes have displays and some not. While displays show steady ON and ready, you might still experience with no dial tone sound/ display Line in Employ.

  [To Reset]
  • Some Ability off button does not fully power off the unit. It only put the VoIP box in standby mode. To truly power off, unplug the power adapter of your VoIP box.
  • Disconnect all devices from the box. After a moment, reconnect your power adapter, and and so press power button to plow ON.
  • Expect until the VoIP box is steady ON and ready.
  • Connect your phone cable from your Telephone base to your VoIP box.

  REMINDER!!!
  • Brand sure you didn't connect the telephone cable from the Telephone wall outlet to VoIP box phone port!!! Doing so will non impairment the device, but information technology will impact the call function and becomes unusable. This is why y'all feel no punch tone, Line in Use with busy tone, etc.
  • During power outage, your landline telephone will not exist available since it requires external electric power despite your VoIP box has a backup battery.

  If this situation persists, contact your VoIP / VoIP box service provider for further support.

How To Register Vtech Cordless Phone Cs6949,

Source: https://www.vtechphones.com/support/technical-support/product/3494

Posted by: kincannonfulies.blogspot.com

Share this post